An ultrasonic cleaners and ultrasonic cleaning equipment manufacturers directory including ultrasonic blind cleaning, aqueous cleaning systems, ultrasonic cleaning machine, ultrasonic cleaning systems, aqueous cleaning equipment, ultrasonic degreasers, ultrasonic cleaning tank, ultrasonic parts washers and ultrasonic parts cleaners. 

Ultrasonic Cleaning Equipment Related Types and Terms

Types of Ultrasonic Cleaning Equipment

• Benchtop cleaners are used to wash small parts. They have a small footprint and are often rested on a counter or table.
  
• Blind cleaning machines are equipment designed to clean window blinds utilizing ultrasonic cleaning techniques. They provide for a very thorough cleaning, removing allergens like dust, pollen, soot and nicotine, as well as any other accumulated grime.
  
• Golf club cleaners clean golf clubs quickly and thoroughly. They are widely used at golf courses for players to use.
  
• Immersion cleaning takes place in a tank using an aqueous solution. In this process, it is the cavitation that releases the contaminant from its base host.
  
• Tabletop cleaners are used to wash small parts. As the name indicates, they are small enough to sit upon a table.
  
• Tank cleaners do not require a lot of complicated machinery. Generally, they are built in a rectangular shape, holding 100 gallons or less.
  
• Ultrasonic cleaning is a process that uses ultrasonic sound waves to clean.
  
• Ultrasonic cleaning equipment uses millions of tiny bubbles to scrub.
  
• Ultrasonic vapor degreasing equipment uses solvents in an environmentally-safe chamber. The vapor and ultrasonic agitation work together to clean parts.
  
• Ultrasonic washers use ultrasound waves and special fluids to clean jewelry, surgical instruments, and golf clubs.
  
  

Ultrasonic Cleaning Equipment Terms


Acoustic/Acoustics – Pertaining to the energy of sound waves and the science and application of acoustic energy.
 
Acoustic Streaming – Currents flowing in one direction through a fluid because of sonic waves, like the action of a transducer in ultrasonic cleaning.
 
Agitation – Rotation of components that allows cleaning solution and cavitation to remove contaminants.
 
Amplification – Mechanical amplitude rising from both ends of an acoustic element. Amplification could be negative or positive.
 
Aqueous Cleaning – The use of water-based solutions for the cleansing process.
 
Basket – Small-parts container comprised of mesh or containing holes.
 
Blind Hole – An air pocket in a component where the cleaning solution cannot reach and the cavitation process cannot occur.
 
Cavitation – Cleansing bubbles caused by ultrasonic waves in liquid, which create negative pressure.
 
Cascade Rinse – The succession of rinses used for the washed part(s). Water flows in a direction opposite of the flow of the parts, which allows for exposure to cleaner water throughout the process.
 
Centrifugal Drying – Using a basket that spins to enable the water and contaminants to separate from the surface of the cleansed part(s).
 
Cleaning Chemicals – Water-based detergent or organic solvents that provide an intense amount of cavitation energy.
 
Cleanliness Check – A water break testing process used to determine if the components are free of oil and other contaminants. A surface quality monitor takes measurement for thin films of contaminants.
 
Closed-loop System – A system in which wastewater is recycled once it has been treated and purified so it can be recirculated through the wash and rinse tanks in an aqueous cleaning system.
 
Continuous Wave – Acoustic wave used in ultrasonic cleaning. Parts exposure to this wave occurs throughout the full process.
 
Critical Cleaning – The cleanest stage possible for the components to experience. Cleanliness is essential for the uses of the product.
 
Diaphragm – A device that generates vibrations.
 
Dryer – The device used in the process of removing moisture from components.
 
Electrode – The component that provides electrical energy at the preferred ultrasonic frequency to the transducer. Electrodes are typically thin metal plates.
 
Generator – Also known as the "power supply," it is the equipment component that provides energy and control to the converter or transducer of an ultrasonic device or system which is electronically run.
 
Hertz (Hz) – A measurement unit for frequency equal to cycles per second (cps). One Hertz is the same as one cps.
 
Horn – A common element of amplification that is equipped with a tip in a probe for ultrasonic systems.
 
Kilohertz (KHz) – A unit of measurement for frequency equal to one thousand cycles per second (cps). 
 
Immersion Cleaning – Cleaning components by submerging them in an aqueous cleaning solution.
 
Load Requirement – A factor that affects the construction of the tank, generator choice and cleansing solution volume.
 
Loop – Point of maximum amplitude.
 
Node – Fixed point of minimum amplitude.
 
Piezoelectric Transducer – A ceramic crystal between two strips of tin. Voltage taken through the tin will displace through the ceramic crystal, and the diaphragm attached to the transducer then creates a pressure movement that makes a wave through the aqueous solution in the tank.
 
Probe – Specific to ultrasonics only, it refers to the converter, horn and tip system that receives power from a generator and performs work.
 
Rinse – Using clean water or solution to remove residual detergent.
 
Somewhat Critical Cleaning – The cleaning level that is lower than critical cleaning. Aesthetic or quality problems could occur if not cleaned well.
 
Somewhat Industrial Cleaning – Not as imperative as the cleanliness of critical or somewhat critical, but still poses an aesthetic or quality problem if not cleaned well enough.
 
Sonic – Pertaining to the velocity of speed of sound in contrast to ultrasonic. Labeling cleaning devices as sonic does not indicate that it is ultrasonic with cavitation, just that it vibrates components.
 
Surface Quality Monitor – Measures film depth of contaminant left on cleaned part.
 
Tanks – Containers to hold the solution and part(s), usually rectangular in shape and manufactured in almost any size.
 
Transducer – Component that receives electrical energy from the generator or power supply and converts it into mechanical vibrations.
 
Ultrasonic Generator – Converts the frequency of standard electric into high frequency needed to create ultrasonic vibrations.
 
Vertical Agitation – An up-and-down motion in an aqueous solution, in which spray blasts clean the submerged parts. Vertical agitation is a powerful cleaning method for parts containing blind holes or intricate passages.
 
Water Break Test – Determines if oil is no longer present on the cleaned part.